Network & bandwidth

Know exactly who's using your network — and what's talking to the outside.

RaqeebIT 360 turns every device into a network sensor: per-device bandwidth with 60 days of history, automatic discovery of switches, routers and printers, a live topology map, threat hunting that checks every external connection against Tor and malware C2 lists — and the controls to block what you find.

60d
of bandwidth history per device
3
discovery scan modes: ARP · Ping · Full
2
kinds of known-bad lists checked: Tor exit nodes & malware C2
3
platforms: Windows, macOS, Linux
Bandwidth analytics

Find the laptop hogging your WAN in seconds.

Upload and download for every device, measured by the agent on the device itself — no appliance, no mirror port, no extra hardware. Sort by top consumers, drill into a single machine, and go back up to 60 days.

  • Upload and download per device — live, plus 60 days of history
  • Top consumers ranked across the whole fleet, so the culprit is always at the top of the list
  • Per-interface breakdown: see whether the traffic went over Wi-Fi or Ethernet
  • Bandwidth alert rules: a Telegram message the moment a device's usage spikes
  • The same picture on Windows, macOS and Linux
Network discovery

Every switch, router and printer on your subnet — found, classified, approved.

Devices that can't run an agent still matter. Discovery scans your subnets and talks SNMP to your network gear, so nothing on the wire stays invisible.

Subnet scan — three modes

ARP for a fast sweep of the local segment, Ping for reachability across the subnet, Full for the deepest view. Pick per scan — a quick check at lunch, a full scan on the weekend.

SNMP for switches & routers

Managed switches and routers answer over SNMP — the same protocol RaqeebIT already uses for network printers — so your network gear shows up with real details, not just an IP address.

Approve, ignore or auto-classify

Every discovered device lands in a review queue. Approve it into your inventory, ignore it (the visitor's phone), or let auto-classification file it under the right type.

Pick a subnet and a mode

Enter the range, choose ARP, Ping or Full, and start. Run it per office, per floor or per VLAN.

Review what turned up

New devices appear with IP, MAC and whatever SNMP revealed. Nothing enters your inventory until you say so.

Approve into inventory

Approved printers get SNMP polling for ink and paper; switches and routers take their place on the topology map.

Topology map

See how everything connects.

A visual map of your network — routers, switches, workstations, servers and printers — so a new admin understands the layout in a minute and a problem device is easy to spot.

  • Built from discovery results and agent inventory (NICs, IP addresses) — no manual drawing
  • Status at a glance: online, offline, isolated
  • Printers and network gear discovered over SNMP appear alongside the devices running the agent
  • Handy for onboarding a new IT admin or auditing a branch office
Threat hunting

Every external connection, checked against known-bad lists.

The agent sees which process talks to which external IP. RaqeebIT matches each connection against Tor exit-node and malware command-and-control (C2) lists — and alerts you the moment something matches.

Tor exit nodes

A workstation talking to a Tor exit node is rarely business as usual. You see which process opened the connection, to which IP, and when.

Malware C2 servers

A connection to a known command-and-control server is the clearest sign of an active infection. Matched as it happens — not in next week's report.

Instant alerts, zero noise

Telegram, email or the in-app bell — with severity, cooldown and auto-resolve like every other rule, so a real hit is never buried.

From alert to action — without leaving the screen

  • Isolate the device in one click. The kill-switch cuts it off the network while the management link stays alive, with an auto-release timer and a fail-open watchdog so you are never locked out.
  • Auto-block known threat IPs across the fleet with Network Control.
  • Ask Raqeeb AI “what did LAPTOP-07 talk to this morning?” — it investigates from live data and can open a ticket, with your confirmation.
  • Every detection and every response is written to the audit log (180-day retention, CSV export).
Critical

Outbound connection matched a Tor exit node

LAPTOP-07 · unknown process · alert sent to Telegram

Action

Device isolated by the admin

Management link alive · auto-release timer set · watchdog armed

Resolved

Ticket opened · threat IP auto-blocked fleet-wide

All three steps recorded in the audit log

Network Control

Block websites and apps — per device or per department.

Seeing is half the job. Network Control turns what you learn into policy: block distracting sites on the sales floor, stop torrent clients everywhere, and auto-block every known threat IP.

What you can block

Target Examples Scope
Websites Social media, streaming, any domain you name Per device or department
Apps Games, torrent clients, any application Per device or department
Threat IPs Tor exit nodes, malware C2 servers Automatic, from the threat lists

How policies work

  • Several policies can apply to the same device or department — a company-wide baseline plus a stricter one for finance.
  • Enforced on the device by the agent — the policy travels with the laptop, not with the office router.
  • Threat-IP blocking updates itself from the Tor and C2 lists, so nobody has to maintain a blocklist by hand.
  • Every policy change is written to the audit log with who, what and when.
  • Pairs with Isolation and USB control on the Device control page.
Questions

Network questions, straight answers.

Do I need a network appliance, a mirror port or extra hardware?

No. Bandwidth is measured by the lightweight agent on each device (under 1% CPU, about 60 MB RAM). Discovery scans your subnets and uses SNMP for switches, routers and printers. Nothing to rack, nothing to cable.

Which operating systems get bandwidth analytics and threat hunting?

All three: Windows, macOS and Linux. The agent reports roughly every 60 seconds, and per-device network data lands in the same dashboard regardless of platform.

What exactly happens when a threat connection is detected?

An alert fires instantly on your chosen channels — Telegram, email, in-app — naming the device, the process and the matched IP. From there you can isolate the device in one click, and Network Control can auto-block known threat IPs so the same address never connects again.

Is per-device bandwidth monitoring compatible with employee privacy?

Collection is privacy-first: granular per-device policies decide what is gathered, surveillance-type categories are opt-in, and the platform is built for GDPR and Egypt Law 151/2020. Bandwidth analytics shows volumes per device and interface; you decide how deep to go. Details on the Security page.

Can Raqeeb AI answer questions about the network?

Yes. Ask in Arabic or English — “who used the most bandwidth this week?”, “why is the branch link slow?” — and it investigates from live device data. Any action it proposes needs your confirmation and is audited.

Ready to see every device in your company?

Free for up to 5 devices. No credit card. First device connected in about a minute.